Add Electrical
7.
Insert the cord of power strip #1 into
the power cutout in the trough that is closest
to the power outlet. Continue to insert power
strips #2, #3 & #4. The cords from each power
strip should be hanging to the floor.
TIPS:
For more in depth resources of the
electrical, visit myturnstone.com electrical
section or see assembly instructions sent
in electrical box.
Install Knobs
8.
Install the knobs, two per power strip, inside
the trough and onto the bottom of the power strip
at each end.
7
8
View from underneath trough.
Page 10 of 23
939500449 Rev J