AL-KO V / VIERKANT Manual De Instrucciones página 11

Limited liability
Checking the brake system does not mean
that the prescribed maintenance measures
for the overrun hitch can be neglected.
The manufacturer cannot be held liable for in-
jury to personnel and damage to material attri-
butable to failure to comply with the safety re-
gulations and to carry out the indicated main-
tenance work.
Oil and lubricating points
Grease and/or oil sliding and articulation
points every 10,000 - 12,000 km or every 12
months (13).
Lubricant type: Multi-purpose grease as per DIN
51825
Maintenance and care jobs
The formation of white rust on hot dip galvanised
vehicle components does not reduce safety, and
can be reduced by the following measures:
When laying up or storing hot dip galvanised
components, ensure good air circulation.
After winter journeys, wash the hot dip gal-
vanised components with clean water (e.g.
steam jets).
580 460_u
Repair work
CAUTION!
Repair work may be carried out only
by AL-KO service centres or authorised
specialist workshops.
Replacement parts are safety parts!
For the installation of replacement parts
into our products, we recommend the
use of original AL-KO parts, or of parts
that we have expressly approved for in-
stallation. For the clear identification of
replacement parts, our service stations
require the replacement part identifica-
tion number (ETI).
Type plate
XXXXXX
1
1
XXXXXX
XXXXXX
en
Spare part identification
number (ETI No.)
11