Setting The Time/Date; Setting The Fan - Honeywell VisionPRO Serie Guia Del Usuario

Ocultar thumbs Ver también para VisionPRO Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting the time/date

1 Touch the current time. The screen
displays Select Option.
2 Touch Time or Date, then touch Select.
3 Touch
or
s
t
date is displayed.
4 Touch
Done
to save or
changes.
5 Touch
Home
to redisplay the Home
screen.
NOTE:
The date is not shown on the
home screen; however, it should be set
to allow the thermostat to adjust time
automatically for daylight saving time
and for other features such as vacation
hold.

Setting the fan

FAN
1 Touch
to display fan settings.
2 Touch On, Auto, Circ, or Follow Schedule.
3 Touch
Done
to save and exit.
On: Fan is always on.
Auto: Fan runs only when the heating
or cooling system is on.
Circ: Fan runs randomly about 35%
of the time (residential use only).
Follow Schedule: Fan controlled by
program (see pages
until the proper time/
Cancel
to ignore
).
4
6
Select Option
Please Set Time
On
NOTE:
In commercial
use, touch Auto or On to
temporarily override the
programmed fan schedule.
3
MCR34092
Time
Date
MCR34155
6
:30 PM
MCR34094
MCR34096
Auto
Circ
MCR34097
69-2761EFS—09

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Visionpro 8000Th8321r1001

Tabla de contenido