Preset Energy-Saving Schedules; Setting The Clock - Honeywell RTH6350 Serie El Manual Del Propietario

Set the time and day
1. Press SET CLOCK/DAY/SCHEDULE,
then press
s
clock time.
2. Press the SET DAY button, then
press or
s t
of the week.
3. Press DONE to save & exit.
If the SET CLOCK/DAY/
NOTE:
SCHEDULE option is not displayed,
press DONE or RUN SCHEDULE.
If the display flashes Set
NOTE:
Clock, the thermostat will follow your
settings for the weekday "Wake"
time period until you reset the time
and day.
Program Schedule
You can program four time periods each day, with different settings for
weekdays and weekends. We recommend the pre-set settings (shown in the
table below), since they can reduce your heating/cooling expenses.
Wake - Set to the time you
awaken and the temperature you
want during the morning, until
you leave for the day.
Leave - Set to the time you leave
home and the temperature you
want while you are away (usually
an energy-saving level).
Return - Set to the time you
return home and the temperature
you want during the evening,
until bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight
(usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.
or to set the
t
to select the day
4 : 30
Fan
Set Clock/Day/
Auto
Schedule
Wed
Done
Set Day
Heat
70
Wake
(6:00 am)
62
Leave
(8:00 am)
70
Return
(6:00 pm)
62
Sleep
(10:00 pm)
13
PM
System
Heat
Set Schedule
Cool
° 78 °
° 85 °
° 78 °
° 82 °
M28403
M28404