Inserting The Battery; Working With The Laser Receiver - LaserLiner SensoLite 310 Manual De Instrucciones

Inserting the battery

In order to preserve the battery life, the
receiver switches off automatically if it
is not used for around 5 minutes.

Working with the laser receiver

Set the rotary laser to maximum speed and switch the laser receiver on.
It is able to detect the laser beam at a great distance now. Move the
SensoLite up and down through the laser beam until the middle indicator (15)
appears. Mark the measured height at the perimeter marking groove.
rapid peeping
The laser receiver has two tolerance settings:
– Free-hand range (12): Display with larger tolerance for rough
!
alignment by hand.
– Precision range (13): Display with smaller tolerance for precision
alignment (e.g. levelling staff).
08
GB
Laser
Continuous tone
= mark the reference
–
+
9V
slow peeping