Installation Instructions
SLC 500 Modular Chassis
1746-A4, -A7, -A10, -A13 Series B
Install Your Chassis
1
Drill holes in the back panel of the enclosure for chassis mounting tabs.
Install the hardware for the top mounting tabs.
2
Note: Scrape paint off the back panel for an electrical
connection between the chassis and back panel.
4
ATTENTION: Be careful of metal chips when drilling
mounting holes for the SLC chassis. Do not drill holes
above an SLC chassis if a processor and I/O modules are
installed.
20288
20288
M4 or M5 (#10 or #12) phillips screw and
star washer (or SEM screw)