Mopar 82212166 Manual De Instrucciones página 15

60. Continue routing the overlay harness (1) rearward
past the B­pillar. Tuck the harness under the carpet
just behind the rear seat's forward mounting location.
61. Continue routing the harness (1) across the vehicle
towards the driver side door rearward of the seat's
mounting locations.
62. Tuck the harness under the carpet. If desired, pull the
carpet up and tape the harness to the floor pan.
63. Remove the large connector (2) taped to the harness
(3) and place on a bench for later use.
64. Pull the carpet back on the rear driver side and remove
the grommet (1).
Feb 18, 2011
15
K6860984