König Electronic HAV-MCS42 Manual De Uso página 10

CD mode
1. One track repeat
Select the track to be repeated and begin
playback. Press the ST-MO/CD-MODE button
once. The RPT indicator blinks in the display and
the selected track will be repeated continuously.
2. All track repeat
During playback, press the ST-MO/CD-MODE
button twice. The RPT indicator shows in the
display and all the tracks on the disc will be
repeated continuously.
3. Random playback
The random playback feature allows you to play
all the tracks on a disc in random order. Playback
stops when all tracks are played once. You can
select random playback while in stop mode or
while listening to the disc. Press the ST-MO/
CD-MODE button three times to start random playback mode, the RND indicator
appears in the display. If necessary, press the BAND/ button to begin playback.
The player will randomly select a track to start playback from.
To cancel random playback, press the  STOP button or press the ST-MO/CD-
MODE button. The RND indicator disappears and normal playback will resume from
that point.
Programmed playback
The CD player enables you to program a total of
20 tracks in any order. Any track can be programmed
as many times as you like.
1. Load a CD into the CD compartment.
2. Press the PROG button while in stop mode.
PROGRAM and P01 00 appears in the display.
3. Press / or / repeatedly to select
the desired track.
4. Press the PROG button to confirm the first track of
the program. P02 appears in the display and the
device is ready for the next input.
5. In order to program the remaining tracks repeat
above steps 3 and 4 until the memory is full.
6. When you have completed programming, press
BAND/ to start playback of the programmed
track list. PROGRAM appears in the display.
Clear Program (Resume Normal Playback)
Press the  STOP button twice while in the program mode, open the CD Door, or
change to another function mode.
10