Steelcase Drive Manual De Instrucciones página 5

Arm Replacement
1.
Adjust chair to maximum seat height.
2.
Turn chair upside down and set on stand or table.
3.
Remove screw from the stretcher. Pull out arm and replace.
(May require tapping arm with rubber mallet.)
WARNING - On chairs before December 1999, set torque to
175-250 in.-lbs.
On chairs after December 1999, set torque to 300-350 in.-lbs.
Pull out
arm
Remove
Screw
Page 5 of 30
939504598 Rev H