Getting Started - oneConcept Magic-Carpet DX Manual Del Usuario

OPERATION

Getting Started

• Place the heating mat on a flat, dry surface.
• Insert the mains plug into a socket with a voltage of 220-240 V.
• Press the on/off button. The heating mat heats up within 15 minutes and
keeps the temperature constant.
• Switch off again after use.
Setting the level
• Press the ON/OFF button to set the heating level.
• Go through the settings High (red lamp), Medium (green lamp), Low (blue
lamp) and OFF one after the other by pressing the On/Off button.
Setting the timer
• To set the switch-off time, press and hold the On/Off button. Now one or
more lamps flash. The time setting starts at 30 minutes.
• Now you can make the following timer settings by pressing the On/Off
button repeatedly.
Active lamps
Blue
Yellow
Red
Green + Blue
Red + Green
• If you have not pressed any button after a few seconds, exit the timer
settings.
• If you want to deactivate the timer, switch off the unit.
Switch-off time
30 minutes
1 hour
2 hours
3 hours
5 hours
EN
9