Storage And Maintenance - EDELRID OHM Manual Del Usuario

Inspection
The product must be inspected and serviced as needed, but at
least yearly by the manufacturer, a qualified person or an
authorised inspection agency. Among other considerations, the
readability of the product identification must be checked. If the
service life of 10 years is exceeded, the PPE product must be
removed from use.
Repairs must be performed exclusively by the manufacturer or a
service partner authorised by the manufacturer.
Any manipulation of the screwed joints on the unit is forbidden,
such work must be performed exclusively by the manufacturer or
a service partner authorised by the manufacturer.

STORAGE AND MAINTENANCE

Storage
Continuous temperature for storage approx. –10 °C to +30 °C,
dry and protected from daylight. Prevent contact with chemicals
(Attention: battery acid!) or corrosive substances. Prevent
mechanic strain by crushing, pressure or tension.
Transport
Protect the product from direct sunlight, chemicals,
contamination and mechanical damage. Use a protective bag or
special storage and transport containers.
Cleaning
Clean contaminated products with hand-warm water (if needed
use neutral soap). Rinse properly. Dry at room temperature, but
never in a spin dryer or near radiators!
Commercial, halogen-free disinfectants may be used if required.
Upon cleaning, the joints of metal parts must be lubricated
regularly with acid-free oil or a lubricant based on Teflon or
silicone.
Labelling of the product
Manufacturer: EDELRID,
Model: product name,
Diameter range of ropes to be used, in mm,
i-Symbol: Read and observe warnings and instructions,
YYYY MM: Year and month of manufacture
Pictorial for proper insertion of the rope,
Lot number with year of manufacture,
CE 0123: Notified body supervising the production of PPE
Declaration of Conformity:
EDELRID GmbH & Co. KG herewith declares that the article is in
conformity with the applicable pertinent requirements and
regulations of the EU Regulation 2016/425. The original
declaration of conformity may be downloaded from the following
website: http://www.edelrid.de/...
Our products are made with greatest care. If there is cause for
justified claims, please let us know the lot number.
Technical changes reserved.