Black and Decker CRISP 'n BAKE TOD6020B Manual De Uso Y Cuidado página 7

STA N D BY/ P OW E R O N
Sleep Mode: When not in use, the timer display and start/stop icon are not
illuminated. If the unit is not in use and the controls are not touched for 5 minutes,
the unit will go to sleep.
Standby Mode: When you press any of the buttons or turn any of the dials, the
timer display illuminates solid and the start/stop icon flashes. This indicates the
oven is ready to be started. If you turn the timer to 00, the start/stop icon will
remain off and you'll need to put time on the oven before starting the oven.
Power On: When you have selected your desired cook time and press the start/
stop button, the oven will power on and the start/stop icon will illuminate solid.
After 30 seconds, the heating elements will glow. During operation, the heating
elements will cycle on and off to maintain the desired temperature.
Add Time: To add time without stopping and starting the unit again while it is
running, turn the time/shade knob to add more time.
Stay On: If you would like the oven to stay on, turn the timer knob
counterclockwise past 0 until the display shows "on" and then press the start/
stop button. You will then need to press the start/stop button again to end the
cooking cycle.
B A K E
Note: For best results, when baking or cooking,
preheat the oven for at least 5 minutes at the desired
temperature setting. While the oven is preheating, the
timer display will flash "PH" every 3 seconds.
Note: This oven has been designed to cook rapidly.
Please inspect your items earlier than the prescribed
cook time for a conventional oven to ensure that they
do not get overcooked.
1. Open oven door and place rack in the up position on the crumb/steam tray.
With the rack in this position you should be able to read the "bake/broil"
label on the rack.
2. Place items to be baked directly on wire rack or place pan on wire rack.
3. Set the Function/Temperature dial to desired temperature.
4. Turn the Time knob to adjust cook time on digital display if you want a different
time than the 15 minute default.
5. Press the Start/Stop button to begin baking. The Start/Stop light illuminates
solid. The digital display counts down while cooking, showing the time
remaining.
6. There are 2 beeps when the baking cycle is complete. The Start/Stop light
turns off. The digital display reads "00".
7