Preparing The Blender For Use - KitchenAid 5KSB7068 Manual Del Usuario

USING THE BLENDER

PREPARING THE BLENDER FOR USE

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Before using the Blender, be sure
the countertop beneath the Blender
1
and surrounding areas are dry and
clean. Then, plug the Blender into
an earthed outlet.
W11036251B.indb 13
Before first use
Before using your Blender for the first
time, wipe the blender base with a warm
damp cloth, then wipe clean with a
damp cloth. Dry with a soft cloth. Wash
the blender jar, lid, Flex Edge tamper,
and ingredient-measuring cap in warm,
sudsy water (see the "Care and cleaning"
section). Rinse parts and wipe dry.
The main power switch is on the back
of the blender base. Flip the POWER
I (
switch to on). The status indicator
2
light above the start toggle button
will begin to flash, indicating that
the Blender is in Standby mode. The
Blender is now ready to operate.
USING THE BLENDER | 13
11/28/2018 2:19:49 PM