Rear Panel - LevelOne WBR-3600 Guía De Instalación Rápida

Rear Panel

WAN
LAN
Reset
Button
Power
Connect this port to your ADSL line.
Use standard LAN cables (RJ45 port) to
connect your PCs to these ports.
This button will reset the WBR-3600 to the
factory default settings.
To do this, press and hold the Reset Button for
five (5) seconds, until the Power LED is lit, then
release the Reset Button, and wait the WBR-
3600 to restart using the factory default values.
Connect the supplied power adapter here.