through the Wizard until finished. Refer to the data
from your ISP, and the table below, to ensure your
choices are correct.
Connection Type
Dynamic IP Address
Static (Fixed) IP
Address
PPPoE, PPPoA
IPoA (IP over ATM)
13. On the final screen of the Wizard, run the test and
check that an Internet connection can be established.
If the connection fails, check both your data and the
ADSL connection.
14. If the connection test fails:
• Check all connections, and the front panel LEDs.
• Check that you have entered all data correctly.
Data required.
Usually, none.
IP Address allocated to you, and
related information, such as Network
Mask, Gateway IP address, and DNS
address.
a) User name and password are
always required.
b) If using a Static (Fixed) IP address,
you need the IP address and related
information (Network Mask, Gateway
IP address, and DNS address)
IP Address allocated to you, and
related information, such as Network
Mask, Gateway IP address, and DNS
address.