LevelOne WBR-3601 Guía De Instalación Rápida página 9

6. There are many ways to connect to your Internet Service
Provider. Please refer to the table below to ensure your
choices are correct.
In all cases, you will be required to enter the VPI and VCI
settings. This must be provided to you by your Internet Service
Provider.
Connection Type
Dynamic IP Address
Static (Fixed) IP
Address
PPPoE, PPPoA
Bridge Mode
Data required.
Usually, none.
IP Address allocated to you, and
related information, such as Network
Mask, Gateway IP address, and DNS
address.
a) User name and password are
always required.
b) If using a Static (Fixed) IP address,
you need the IP address and related
information (Network Mask, Gateway
IP address, and DNS address)
The authentication process is not done
by the WBR-3601, but by another
device or PC. Note that the router and
firewall functions do not apply under
this mode.
9