Denver MRP-161 Manual Del Usuario página 28

Press the " Play/Pause
1.
Press the " Play/Pause
2.

Stop mode
If " Stop " button (8) is pressed during play or pause mode, system will go to stop mode.
1.

Skip mode (skip up
During play or pause mode, if " skip up
1.
remain the play or pause mode.
During play or pause mode, if " skip down
2.
no. is display and remain the play or pause mode.
After step 2, press " skip down
3.

Search mode (search up
During play mode, if " skip up
1.
During play mode, if " skip down
2.

Repeat mode
Press the Repeat button before or during playback, a single track or all the tracks can be played in difference mode as follow:-
For CD
(1) Repeat 1 (2) Repeat all track
Indicator
Play mode on LCD display
Repeat track Flash on display
Repeat all
Off mode --------------

Random mode
1. Press Random button (9), you can listen all the tracks in random order by this function
CD disc programming
Up to 20 tracks can be programmed for CD and play in any order. Before use, be sure the system is at stop mode before
programming :-
1. Set in CD mode & stop the CD playback.
Press the " Mem/Clk-adj " button, " MEM " icon and track no. will flash on LCD display (2). Moreover, it will indicate program no. to
2.
be programmed.
3. Select a desired track by pressing skip up
Press the " Program " button to store the trace into memory.
4.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
When all the desired tracks have been programmed, press CD " Play/Pause
6.
To cancel the programmed file, press " stop
7.
Listing to tape
General operation
Stop / eject key
Fast forward key &
Fast rewind key
Play key
Pause key
Record key
(deck 1 only)
Playback
 Press Function button (10) to select " Tape " mode.

Put in the cassette tape.

Press Play key to active playback

Adjust the Volume up/down control (3) to the desired level.

Use Pause key when you want to stop playback temporarily.

Press Stop / Eject key
Notes:
It is possible to play a cassette in both cassette players, one after the other. If you press the "Pause" and "Play" buttons together at
deck 1 and then the "play" button at deck 2, the tape in deck 1 will start player automatically after the tape in deck 2 has finished
playing.
" button (21) to pause playback, the current track number will flash on display.
" button (21) again to resume normal playback.
/skip down )
" button (25) is pressed it will go to next track and display the track no. and then
" button (12) is pressed. It will go back to the beginning of the track, original track
" button (12) again, it will go to the previous track and remain the play or pause mode.
/search down )
" button (25) is pressed & hold for few seconds, it will start searching forward.
" button (12) is pressed & hold for few seconds. It will star searching backwards.
(3) off mode
Show on display
or down
" button (8) until " MEM " is disappear on LCD display (2)
Press to stop all deck operation. Press again to open the cassette door.
Press to start rapid tape winding in either forward or revers
direction. Press stop / fast rewind key eject keys when the cassette spools stop turning.
Press to start playing tape.
Press to stop tape operation temporarily. Press again to resume play.
Press together with play key to start tape recording.
when finished.
buttons (25,12).
" button (21) to play the disc in assigned order.
EN-3