Denver MRP-161 Manual Del Usuario página 29

Recording
A. Recording from tape (deck 2 to deck 1)
This unit enables you to duplicate a pre-recorded tape to another tape. It is performed only one way from deck 2 (playback) to deck 1
(recording).
Dubbing at normal speed
 Select " Tape " mode from function button (10) and then set the High speed dubbing button (6) at

Inset a pre-recorded cassette into deck 2 and a blank cassette tape into deck 1.
 Press the " Pause " key
 Press the " Play " key to start playback at deck 2 & then release " Pause
 Press " Pause " key at deck 1 & " stop " key at deck 2 when finish dubbing.
Dubbing at high speed
This unit is quipped with a high speed dubbing system which can save the time for dubbing by 2/3 when compare to normal speed.
 Press the dubbing button (6) to " hi
speed".
 When dubbing a pre-recorded cassette tape at high speed, a chattering sound is being heard. To avoid this, set the volume control
to a minimum level.
 Do no press the " High speed dubbing " button (6) to hi or nor. position during dubbing, this will vary the speed of recording and
may be damage the cassette tape.
B. Recording from radio
 Select " Tuner " mode from function button (10)

Tune to the desired station and insert a blank cassette tape in deck 1.
 Press " Record " & " Play
 Press " Pause " keys and then " Stop/Eject
C. Recording from CD
 Select " CD " mode from function button (10).

Insert a black cassette tape in deck 1 which suitable for recording.
 Press " Pause " key first and then " record
 Start playback CD, and then press " Pause key
 To stop recording, press " Stop
on cassette tape deck.
D. Recording from turntable
Select " Phono " mode from function button (10).
insert a blank cassette tape in deck 1.
Press "Record " & " Play
Select the desire record and start playback
Press " Pause " keys and then " Stop/Eject
More features
A. Sleep function
Press " Sleep " button (4) and sleep indicator "
1.
Keep pressing the button to adjust the sleep timer in the order from 10>20>30....90 minutes respectively.
2.
3. System will stop and go to standby mode automatically after the selected timing.
To cancel the sleep mode, press " Sleep " button until the display show "OFF" and "
4.
(2).
Remark:-
If press the sleep button once and the "
automatically after selected minutes.
B. Timer on setting
This function allows the system to turn on automatically and wake you up by CD or Radio mode respectively.
1) Wake up time : First, set the unit at standby mode and then press & hold the " Timer " button (22) to enter the timer setting mode,
the first two digits of clock will flashing. Press skip up
press " Timer " button (22) again to confirm. Then press skip up
minutes & press " Timer " button (22) to confirm.
2) Wake up source : Press the "skip up
" Timer" button (22) again to confirm selected the source .
3) Wake up volume : Press skip up
"Timer" button(22) to confirm
The system will turn on automatically from standby mode once it reach the selected time and the timer indicator "
display and unit will switch off automatically after running 60 minutes. Press "Timer"(22) or "On/Standby" (7) button can switch off the
timer function at any time.
Remark:-
If there is no music source being detected (such cd) when the preset time is reached, system will default to " radio " function for

wake up mode automatically. The system will preset at the latest radio frequency being listened before switching off

For tuner wake up, the system will preset at the latest radio frequency being listened before switching off.

Active/de-active timer function
and then press the " Record
" position and then follow the same procedures as stipulated in "dubbing at normal
" key to start recording.
" key when finish.
" & " play
" at cassette to start recording.
" button (8) on CD mode first, then press the " Pause
" key to start recording.
" key when finish.
will "shown on the LCD display (2).
" indicator appear on the LCD display (2), the system will go to standby mode
" button (25,12) to select the source from "CD" - " FM " repeatedly. Press
/ down
" button (15,21) to set the wake up volume level from 1 to max. And then press
/ down
" and " Play " key at deck 1.
" key at deck 1 to start dubbing.
" key at cassette. Recording function is now on standby.
/ down
EN-4
" nor. " position
" key and then "Stop/Eject
" indicator disappear on LCD display
" button (25,12) to set the hour & then
" button (25,12) to set the
/ down
" will flash on the
" key