Emmaljunga Viking Manual De Instrucciones página 56

Assembly and usage of chassis
11
15
14
12
16
13
14
56
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Folding the chassis
• Start by making sure that the brake is engaged.
• Lower the backrest/seat unit into its lowest position by pulling the
backrest lever and lowering the seat unit down to it's lowest posi-
tion before it is folded.
IMPORTANT!
• The backrest/seat unit should always be in its lowest position (fully
reclined) before the pram is folded. Please note! The lowest recline
position should only be used when folding the stroller.
• When folding: Make sure the Adjustable Comfort System is set in
the highest position to avoid pressure marks on the rear wheels
while the chassis is in the folded position.
• Ensure the front wheels are in the swivel position by pulling the
locking rings up.
• Fold the chassis by first pressing in the buttons (14) at the same
time and pull the two main locking devices, one on each side up-
wards (15).
• Lift the secondary locking device (16) and fold the handle forward.
• If you need to make more space you can remove the wheels by
pressing in the hub cap's release mechanism and pulling the wheel
off the axle.
• Wipe off any dirt or grease from the axles before you replace the
wheels.
WARNING
• Never pull a pram with swivel front wheels behind you. The pram
might self turn which can lead to a safety risk if you are not cautious
and attentive.
Transport clip
A transport clip is attached to the chassis.
• Fold the chassis and snap the clip over the chassis frame to secure
it in place.
Viking v. 3.0