Descargar Imprimir esta página

Mopar 82211870 Instrucciones De Montaje página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Pull back the locking wedge on the back of the "D" connector and remove the plastic pins in cavity 11 and 16.
6. Insert the WT/OR wire from the supplied jumper harness (1) into the back of the "D" connector cavity 11.
7. Insert the WT/YL wire from the supplied jumper harness (1) into the back of the "D" connector cavity 16.
8. Push the locking wedge forward on the "D" connector to lock the wires in the connector.
9. Connect the "D" connected back into the TIPM.
10. Connect the fog lamp wire harness to the TIPM jumper
harness (1).
11. Install the ground wire (2) for the fog lamp wire har­
ness.
Oct 24, 2008
5
K6860678 Rev. 1

Publicidad

loading