Hansgrohe AXOR CItterio 27981000 Instrucciones De Montaje página 24

The hand shower is suitable for continuous flow
water heaters with a heat output of 21 kW and a
minimum through flow of 7 l/minute.
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Optimal functioning is only guaranteed with the combination of Hansgrohe hand showers and Hansgrohe
shower hoses.
Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device
between the fitting and the hose.
4
English
max. 0,6 MPa
0,1 – 0,4
max. 60° C
Where the contractor mounts the product, he
should ensure that the entire area of the wall
to which the mounting plate is to be fitted, is
flat (no projecting joints or tiles sticking out),
that the structure of the wall is suitable for
the installation of the product and has no
weak points.
The enclosed screws and dowels are only
suitable for concrete. For another wall
constructions the manufacturer's indications
of the dowel manufacturer have to be taken
into account.