Dash Disassembly - Metra 99-8905B Instrucciones De Instalación

1. Disconnect the air selector cable
located on the driver's side of the
center console, behind the dash and
above the gas pedal. (Figures A & B)
2. Open the glove box and squeeze in
on the sides to remove it.
3. Disconnect the temperature
selector cable located on the
passenger side of the center
console, behind the glove box.
(Figure C)

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
99-8905B
4. Unclip and remove the trim panel
surrounding the factory radio
including the a/c vents and climate
controls. (Figure D)
5. Remove (4) Phillip screws from the
factory radio and remove. (Figure E)
Continue to kit assembly
2
(Figure D)
(Figure E)