Kit Assembly - Metra 99-8905B Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and
trim ring from the aftermarket
radio.
2. Attach the Radio Brackets to the
Radio Trim Panel. (Figure A)
3. Secure the pocket to the completed
assembly using (4) #8 x 3/8" Phillips
screws provided. (Figure B)
4. Slide the radio in from the back of
the kit, and then secure the radio
to the completed assembly using
screws supplied with the radio.
(Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
99-8905B
(Figure B)
3
(Figure C)