P O R T E R O D I G I T A L - D I G I T A L D O O R E N T R Y S Y S T E M S - P O R T I E R N U M É R I Q U E
SOPORTE DE CONEXIONES. MONITOR CONSERJERÍA
CONNECTION BRACKET. CONCIERGE SYSTEM MONITOR
SUPPORT DE CONNEXIONS. MONITEUR CONCIERGERIE
Recomendaciones:
Choose an area of smooth, uniform and hard wall when deciding where to place the monitor. If the bracket is fixed to a standard electrical
box, make sure that this is uniformly aligned. This way you will get an optimal fixing of the monitor. Place the connection bracket beside the
concierge panel, taking account of the length of cable which will be necessary to connect the connection bracket to the CC2 audio unit connector.
Recommendations:
Put it far from direct light sources, avoiding nonwhished effects in picture display (reflections, ...). Same way avoid hard sources of heat, humidity,
steam, that could reduce the operational life of the equipment.
Recommandations:
1
Fix the connection bracket to the wall with
plugs and screws supplied. 4 holes placed
on the corners are recommended. Position
the bracket vertically and in such a way
that the top part is 166 cm above the floor.
2
Bracket can also be fixed to a standard
electrical box.
3
Make the electrical connections. See
diagrams and "Connection instructions"
Page 8 or 9.