Installing And Adjustment Instructions - Alcad PAK-03020 Manual De Instrucciones

P O R T E R O D I G I T A L - D I G I T A L D O O R E N T R Y S Y S T E M S - P O R T I E R N U M É R I Q U E
INSTRUCCIONES DE INSTALACIÓN Y AJUSTE

INSTALLING AND ADJUSTMENT INSTRUCTIONS

INSTRUCTIONS D'INSTALLATION ET DE RÉGLAGE
TELÉFONO DE CONSERJERÍA - TELEPHONE FOR CONCIERGE SYSTEM - TÉLÉPHONE POUR CONCIERGERIE
If the concierge unit telephone is situated on the wall, place the telephone beside the concierge unit panel, taking account of the length of cable
which will be necessary to connect the telephone to the CC2 audio unit connector.
1
Disconect the cord between the telephone
base and the receiver.
4
Fix the base to the wall with plugs and
screws supplied.
Nota:
Note: If using a desktop support, pass the connections cable and fix the telephone as shown in the desktop support for digital concierge unit
with telephone data sheet.
Note:
2
Move the cover on the base of the telephone
to the right.
5
Once the electrical connections have been
made (consult “Connection instructions”
Page 8), close the telephone and fix the
cover to the base using the clamping screw.
3
Remove the cover from the base of the
telephone.
6
Connect the cord between the base of the
telephone and the receiver.