aqprox appLS08 Manual De Instrucciones página 8

2. Setting code switch
By turning on the setting code function, the parameter configuration of the
reading module can be carried out by scanning the setting code.
* Open the setting code * Closing the setting code
3. Recovery factory setting
By scanning the "restore factory setting" barcode, all the parameters of the
read module can be restored to the factory's configuration.
Recovery factory setting
4. User default settings
In addition to factory settings, users can also save configuration. For users
often use their own default settings, by scanning the "current settings for
the user defaults", the device can be the current configuration information
is stored as a default user information, if the user has read module default
information, the operation after the new configuration will replace the original
user default information.
8