Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of cable
1. Refer to the picture, connect the host with the scanner.
2. Switch on the host. If the installation is successful, the beeper and
LED will work.
3. Scanner can work without external power supply.
4. Host will automatically detect the scanner.
Demoliton of the wire
The demolition method is as follows:
1. Find the hole close to the end of the scanner.
2. Put a thin needle into the hole, softly drag the wire out.
Barcode menu
This model of laser desktop barcode scanner is designed to change
settings by reading some special barcode, which we will give you a de-
tailed introduction and show you all the barcodes for the corresponding
setting in this section.
The greatest advantage of this setting method is direct, intelligible and
user friendly.
10
Publicidad
Tabla de contenido
