Cleaning And Maintenance - Eldom hazy NU6N Manual Del Usuario

3. ON/OFF
It takes charge the electric supply of the whole unit. When press ON, the display is on,
the machine operates with the lowest mist output, at the same time the fan motor
works. When it is OFF, all the functions are invalid, and the display is off.
- symbol signalizes turning the unit off
- humidity level in a room
4. PRESET
When the unit stands by, press this button. The preset time can be chosen from 1
hour to 24 hours. The preset time will be counted down to work with the highest mist
output.
5. MIST
4 levels from Low, Middle, Senior to High for different mist output. Changes are
signalized by number of illuminated segments
6. TIMER
Settings from 1- 24 hours. 0 means cancelling the settings. 3 seconds after your
settings, the timer function will be counted down to work by minutes and will display
with current humidity by turns for 5 seconds if having set the humidity level.
7. HUMIDISTAT
Settings from 40 -95RH% by 5RH%. 0 means cancelling the settings. 3 seconds after
your settings, the humidistat works. It stops when the current humidity is more than
the setting level, but the fan motor will keep working for
5 minutes. And will operate when the current humidity is 2RH% less than the setting level.
8. ANION
When the machine stands by, press the ANION button, it works whatever it is
humidifying. The fan motor works at the same time. If it is not humidifying, when the
ANION is off, the fan motor stops. But if it is humidifying, when the ANION is off, the fan
motor still works.
9. "Waterless"
1.Protection when waterless: When the tank is out of water, the Waterless lamp is on. And
the machine stops. Then the settings of TIMER and HUMIDISTAT will be cancelled. When
filling the water, it should be reset for the functions.

CLEANING AND MAINTENANCE

1. Before cleaning, unplug the appliance.
2. It is recommended to clean the water tank regulary.
3. Do not immerse the humidifier in water or other liquid substance.
4. Do not use any aggressive cleaning agents.
5. It happens that in the base or in the ultrasound converter (C) a scale is formed which
can be removed by pouring 30% distilled vinegar on the elements and leaving it there
for 30 minutes.
6. For cleaning use the brush (6) located in the base (3).ENVIRONMENTAL
12|EN