Table Stand; Key Features - Nightlight With Motion Sensor; Front View; Back View - Oregon Scientific JMR868 Manual Del Usuario

TABLE STAND

The wall clock can be placed on a table using the table
stand.
KEY FEATURES - NIGHTLIGHT WITH
MOTION SENSOR

FRONT VIEW

1
2
3
4
5
1. Rotary Motion Sensor
Detects motion and activates the nightlight and
c l o c k b a c k l i g h t i n a c c o r d a n c e w i t h t h e
settings used.
Twist the knob to direct the sensor to the position
you want.
2. Light Sensor
Detects the light intensity of the environment.
3. Light ON
Press to turn the clock backlight ON for 10
seconds remotely.
4. Power - ON / OFF
Slide to the appropriate setting to turn the battery
or AC power ON or OFF.
5. 4.5V Adaptor Socket
6. Light Panel
When activated the panel will light up.
7. LED Indicator

BACK VIEW

1
2
3
4
5
1. Wall Mount Hole
2. Battery Compartment
Uses 3 x UM-3 / AA 1.5V batteries.
3. Channel 1 / 2
6
Slide to select either Channel 1 or Channel 2.
4. Code switch
Slide to change the Code.
5. Mode - On / Off / Auto
Slide switch to ON - the nightlight will turn on in
a dark room.
7
Slide switch to OFF - the nightlight is turned
o f f .
Slide switch to AUTO - the nightlight will only be
activated by motion in a dark room.
6. Clock Control - On / Off
Slide switch to ON - when motion is detected,
the clock backlight will be activated.
Slide switch to OFF - the clock backlight will not
be activated by the motion sensor.
7. + Light - Rotary knob
Rotate to adjust the sensitivity of the light
sensor.
8. Reset button
Press to reset the nightlight.
3
6
7
8