Temperature And Humidity Trend; Ice Warning; Hi / Lo Temperature / Humidity Alarm; Heat Index - Oregon Scientific RMR383HG Manual De Usuario

TEMPERATuRE AND HuMIDITY TREND

The temperature and humidity trend icons are based
on recent readings.
RISING STEADY

ICE WARNING

If the channel 1 sensor falls between 3°C to –2°C (37°F
to 28°F), flashes to warn you that the temperature is
approaching freezing.
NOTE The warning will automatically stop if the
temperature goes outside the ice-warning range.

HI / LO TEMPERATuRE / HuMIDITY ALARM

An alarm can be set to sound if sensor set to channel
1 records above or below a temperature / humidity of
your choice.
To set alarm ON/OFF:
1. Press and hold TEMP / HuMIDITY HI / LO
2. Use and to select high / low temperature /
humidity alarm. Press TEMP / HuMIDITY HI / LO
to confirm.
3. Press / to set alarm ON / OFF and press TEMP
/ HuMIDITY HI / LO
FALLING
.
to confirm.
4. If alarm has been activated, use
the temperature / humidity.
5. Press TEMP / HuMIDITY HI / LO
To silence the alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature selected is exceeded
again.
NOTE The THN132N sensor supplied does not support
humidity readings. To enable Hi / Lo Humidity alarm
a thermo-hygro sensor must be purchased and set
to channel 1. For further information on compatible
sensors such as the THGR268 thermo-hygro sensor
please check with your local retailer or go to www.
oregonscientific.com.

HEAT INDEX

The heat index combines temperature and humidity data
to describe the actual temperature felt. The THN132N
sensor supplied does not support heat index display. A
thermo-hygro sensor must be purchased to enable heat
index display for channels 1-3.
9
and to select
to confirm.