Selecting Programmes - Silvercrest SLE 320 D5 Instrucciones De Uso

Selecting programmes

The appliance has 4 distinct programmes.
♦ Press the
The programme LED q of the set programme lights up.
DRY CLOTHES
You can use this programme to dry damp laundry faster. Move the flap 6 on
the air outlet so that the airflow is directed towards the garments to be dried.
Changes regarding the desired air humidity and the fan level are not possible in
this programme.
TARGET HUMIDITY
This programme offers you the option of setting the desired air humidity level that
should be achieved yourself.
♦ Press the
in 5% steps between 30% and 80%. The set value flashes on the display t
for approx. 5 seconds and then the current relative humidity value is shown
again.
As soon as the selected humidity is reached, the
REACHED LED a lights up.
Additionally, you also have the option to select the setting
make a setting below 30% relative humidity. This setting allows you to achieve
a very low humidity as the dehumidification runs permanently.
To achieve maximum dehumidification, the fan speed must be set high. To do this,
press the
NOTE
► The minimum humidity that can be achieved in
many factors, such as the room size or the ambient temperature, etc.
Therefore, it is not possible to define a generally applicable minimum value.
FAN FUNCTION
No dehumidification takes place in this programme. The room air is drawn in
through the air inlet, passes through the filter 8 and is discharged back into the
room via the air outlet.
♦ Press the
The LEDs
■ 14 │ GB │ IE
MODE button w repeatedly to set the desired program.
UP arrow z or
FAN SPEED button e, until the LED
FAN SPEED button e to select the desired fan level.
g (low) and
DOWN arrow u to set the desired humidity
h (high) lights up.
mode is dependent on
h (high) indicate which fan level is set.
HUMIDITY
if you want to
SLE 320 D5