Fault
Possible cause
The air ejected
Heat exchange process
is warm.
The error code
Temperature sensor error /
E 1 flashes on
Humidity sensor error
the display t
NOTE
►
If the solutions presented above do not resolve the problem, please contact
Customer Service (see section Service).
Disposal
Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of the European WEEE
(Waste Electrical and Electronic Equipment) Directive 2012/19/EU.
Dispose of the appliance via an approved disposal company or your municipal
waste facility. Please comply with all applicable regulations. Please contact your
waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how
to dispose of the product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.
Disposal of the refrigerant
This appliance contains R290 (propane) as a refrigerant. The system is hermeti-
cally sealed.
The undamaged refrigerant must be disposed of professionally. Please contact
your waste disposal facility if you are in any doubt.
Disposal of the packaging
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable. Dispose of packaging materi-
als that are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner. Note the
labelling on the packaging and separate the packaging material components for
disposal if necessary. The packaging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard, 80–98: composites.
SLE 320 D5
Remedy
This is a normal feature of the
appliance.
Contact the Customer Service
department.
GB │ IE
│
21
■