How To Measure - Sanitas SBM 06 Instrucciones Para El Uso

Display mark
Measuring error
Measuring
blood
pressure
symbol

9. How to measure

A. Inserting batteries in position:
a Open battery cover.
b Refer to the picture in positioning batteries. (Figure No. 3)
c All LCD segments appear on the display in 3 seconds.
d Display 1 month, 1 date, 12 hour, 0 minute.
B. Setting Date and Time:
a Press MODE button ("month" starts flashing).
Press SET button to set the correct month (1,2,3,... 12).
b Press MODE button again ("date" starts flashing).
Press SET button to set the correct date.
c Press MODE button again ("hour" starts flashing).
Press SET button to set the correct hour in 12-hour format.
The time is being displayed in 12-hour format, which means a time from
13:00 onwards is being displayed as 01p:00.
d Press MODE button again ("minute" starts flashing).
Condition/Cause
Appears when the accurate
blood pressure could not
be obtained accurately.
Appears all the time till the
measurement being com-
pleted.
Action
Press "start/stop" button again
and re-measure. Or check
cuff if wrapped at the wrist
or according to instructions.
Check palm if exerting effort.
Check if talking or moving
during measurement. Check if
posture is incorrect.
0