Sanitas SBM 06 Instrucciones Para El Uso página 22

with "SET". The number of stored data sets of this user memory appears
below on the right. The average of all readings saved is shown by pres-
sing the "MEMORY" key. Press "MEMORY" again and the last recorded
values appear. You leave the memory mode with the Start/Stop key. The
device switches off automatically after 1 minute.
c Erasing data:
(1) Take out the batteries and then refill 2 pcs batteries again.
(2) To discontinue if the data is erased. Press "RECALL" button, no
data should show up on the screen.
E. To change batteries:
When " " show up on the display, the battery is weak. Change the batteries
or it will not be possible to take blood pressure measurement. Used batteries
do not belong in the household waste. You are legally obliged to
dispose of the batteries. Dispose of them via your specialist elec-
trical supplier or local collecting point for recyclable waste. Note:
Batteries containing pollutant substances are marked as follows:
Pb = Battery contains lead, Cd = Battery contains cadmium,
Hg = Battery contains mercury.
10. Cleaning
• Clean your blood pressure computer carefully only with a slightly
moistened cloth.
• Do not use detergents or solvents.
• On no account must you immerse the computer in water, otherwise liquid
can enter it and cause damage.

Pb Cd Hg