Call Timer; Hearing Aid - Doro 915c Syntiro Manual De Instrucciones

Ocultar thumbs Ver también para 915c Syntiro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Browsing the call memory
then v / V to scroll through
1.
Press
the call memory. The number and time
of each call will be displayed. For calls
older than 4 hours, the date of the call is
displayed instead of the time.
Press C to exit the call memory.
.
Deleting numbers from the call memory
then v / V to scroll through
1.
Press
the call memory.
Press and hold C to delete the selected
.
entry.
Copying call memory entries to the
phone book
then v / V to scroll through
1.
Press
the call memory.
.
Press and hold * until
The selected number has now been saved
to the phone book.

Call timer

The display shows the current time when
in standby mode. During a call the display
will show a call timer instead, indicating
the duration of the call. The call duration
is displayed for 5 seconds after the call is
terminated.
Recall key (R)
Press the R key followed by the extension
number to transfer a call when connected to a
PBX system.
Additional network services may be accessible
by using the R , * and # keys. Please
contact your network operator for more
information about the available network
services.
English
OK
is displayed.
Volume Boost
The handset volume can be raised another
30 dB by pressing the Volume Boost key
while talking. The LED indicator on the key
will light up.
Press the key again or terminate the call to
turn off Volume Boost.
Warning!
The handset volume can be very loud with
this setting. Volume boost should only be
used by persons with impaired hearing.
Handset tone
The speech tone (bass/treble) can be adjusted
for better clarity using the handset tone
control on the left side of the phone.
PLEASE NOTE! Only works when the powerful
amplification (Boost) is active.
Ringer indicator
The Ringer indicator lights up on an incoming
call. The indicator is enabled/disabled with a
switch on the back of the telephone.
External alert
An external alert device such as a vibrator can
be connected to the vibrator socket on the
back of the telephone.

Hearing aid

This telephone is hearing aid compatible.
Select the T mode on your hearing aid to
enable this feature.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido