miniland baby digimonitor 3.5 touch Manual Del Usuario página 37

ENGLISH
5.2.6.8.1. MONITOR SETTINGS (Figure 16)
To choose this option, click on the icon .
- Pair (Figure 17)
This product is designed to allow observation of different areas with up to 4 cameras (channel 1,
2, 3 or 4 assigned to different cameras). The monitor and the original camera leave the factory
programmed with channel 1. If you need to add an extra camera, follow the following process.
After entering the Pair submenu, select the channel in which you want to link the new camera by
clicking the relevant icon. Keep in mind that the cameras that are showed in green have already
been paired to the monitor, the ones that haven't, have a grey background.
The icon will then change and the ON/link LED (1) of the monitor will flash green. Press the
link button (VI) of the camera and, if the process has been carried out successfully, the icon will
appear in green in place of the previous one and the LED indicators will light up green.
If linking is not successful, the icon will appear. In this case, try again with the same channel
or with another channel if necessary.
For various reasons, connection may be lost between the monitor and a camera already linked.
In this case, repeat the process explained above to relink the camera to the monitor.
· Date/Time (Figure 18)
Access to this submenu allows you to set the date and time appearing on the baby monitor.
· Alarms (Figure 19-20-21)
This submenu allows you to configure up to 4 different alarms: feeding , diaper changing ,
medicine and sleeping . To set them, click on the icon of the alarm you want to activate and
set the time when you wish that it warns you.
1. Feeding alarm : When this alarm is activated, the icon (s) appears on the main screen.
While the alarm sounds, the (s) icon will flash. You can press it to choose whether to repeat the
alarm for the next day or disable it.
2. Diaper alarm : When this alarm is activated, the icon (t) appears on the main screen. While
the alarm sounds, the (t) icon will flash. You can press it to choose whether to repeat the alarm
for the next day or disable it.
3. Medicine alarm : In this alarm, you must first set the time when you want the alarm to warn
you for the first time. For example, if you set the Start Time to 9:00 a.m. and the alarm to ring
every 4 hours (a total of 6 times), the first alarm will ring at 9:00 a.m, the second at 1 p.m, the
third at 5 p.m and the last at 9 p.m. When this alarm is activated, the icon (u) will be displayed
on the main screen.
4. Sleeping alarm . When this alarm is activated, the icon (v) appears on the main screen.
While the alarm sounds, the (v) icon will flash. You can press it to choose whether to repeat the
alarm for the next day or disable it.
You can access this submenu from the main screen by pressing the (q) icon.
· Auto Switch Time (Figure 22)
This baby monitor offers the possibility of the monitor displaying the image of each camera for a
few seconds on a cyclical basis.
From this submenu you can select the time you want to display the image of each camera and
the cameras to be included in the cycle between the ones already connected to the monitor.
· Zoom (Figure 23)
You can increase the size of the image displayed by means of a central zoom. Click on the + sign
to zoom in or on the – sign to zoom out. It allows for an x3 enlargement, in steps of 1 increase.
To exit the zoom feature, press the menu button (5).
· TV Out format (Figure 24)
With this submenu you can choose the format of the output signal received by your TV. To see
or hear the baby from your TV, connect the AV output connector (15) of the monitor to the socket
of your TV, using an RCA cable (not included). This input is compatible with cables with the
following channel configuration: (Figure D)
37