Low Battery Warning; How To Use The Table Stand Or Wall Mounting; The Reset Button; Getting Started - Oregon Scientific BAR122HGN Manual Del Usuario

LOW BATTERY WARNING

When it is time to replace batteries, the respective
low-battery indicator will show up when the respective
channel is selected. The battery level of the main unit
will be shown on the indoor temperature when it is
running low.
HOW TO USE THE TABLE STAND OR WALL
MOUNTING
The main unit has a removable table stand, which when
connected, can support the unit on a flat surface. Or you
can remove the stand and mount the unit on a wall using
the recessed screw hole.
As for the remote unit, it comes with a wall-mount holder and
a removable stand. Use either to hold the unit in place.
Main unit
Wall-mount
P/N:086L002706-173 REV1
Table Stand
Remote unit
Wall-mount

THE RESET BUTTON

This button is only used when the unit is operating in an
unfavorable way or malfunctioning. Use a blunt stylus
to hold down the button. All settings will return to their
default values.

GETTING STARTED

Once batteries are placed in a given remote sensor
unit, it will start transmitting information at 40-second
intervals.
Also, for approximately a 3-minute duration, the main
unit will automatically search for signals once batteries
are installed. Upon successful reception, the individual
channel temperature reading will be displayed on the top
6
Table Stand