Temperature And Pressure Trend; Ice Warning; Hi / Lo Temperature Alarm; Moon Phase - Oregon Scientific BAR386 Manual De Usuario

To end auto-scan:
Press CHANNEL or MEM.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.

TEMPERATURE AND PRESSURE TREND

The temperature and pressure trend icons are based on
recent sensor readings.
RISING STEADY

ICE WARNING

If the channel 1 sensor falls between 3°C to –2°C (37°F
to 28°F), flashes to warn you that the temperature is
approaching freezing.
NOTE The warning will automatically stop if the
temperature goes outside the ice-warning range.

HI / LO TEMPERATURE ALARM

An alert can be set to sound if the sensor set to channel 1
records above or below a temperature of your choice.
To set alarm ON / OFF:
1. Press and hold TEMP HI / LO
2. Use
Press TEMP HI / LO
3. Press
HI / LO
4. If alarm has been activated, use
the temperature.
5. Press TEMP HI / LO
To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is exceeded again.
FALLING

MOON PHASE

• When calendar is set press
phase for the next/previous day.
• Press and hold
(2001 to 2099).
8
.
and to select high / low temperature alarm.
to confirm.
/ to set alarm ON / OFF and press TEMP
to confirm.
to confirm.
or
or to scan through the years
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent
and to select
to view the moon