Navigating Through Main Menu; Changing Settings; Clock Setting Mode - Oregon Scientific AWS899 Manual De Instrucciones

NAVIGATING THROUGH MAIN MENU

To access the Main Menu from any screen press HOME.
Press UP or DOWN to highlight a desired option then
press ENTER to activate it.

CHANGING SETTINGS

To change the settings, navigate to the SETTINGS
Mode from the Main Menu as shown above. Then:
1. Press UP or DOWN to highlight the option you wish
to change.
2. Press ENTER to select it.
3. Use the UP or DOWN buttons to change values.
4. Press ENTER to confirm changes.
TIP Selecting the exit icon
previous screen.
will return you to the
10

CLOCK SETTING MODE

Auto-synchronization should be deactivated before you
manually set the clock. To do this, follow the instructions
stated below and turn the RF clock function OFF in
CLOCK Setting Mode.
1. From the Main Menu, access the SETTINGS Mode.
Press UP / DOWN to
select CLOCK Setting
Mode, then press
ENTER.
2. Choose the settings that you want to adjust and edit
as shown in the Changing Settings section.