Turn Radio Reception On / Off; How To Change Settings - Oregon Scientific AWS899 Manual De Instrucciones

To view the status of the main unit's signal with the
radio-controlled clock signals, look for the
shown in the CLOCK & ALARM Display area. It
indicates 2 factors:
• Connection between the main unit and the sensor
( )
• RF signal reception (
How these signals work together:
ICON MEANING
The unit has contact with the sensor
and has synchronized the time.
The unit has contact with the sensor
b u t t h e t i m e h a s n o t b e e n
synchronized.
The unit has lost contact with the
remote sensor but the time is
synchronized.
The unit has lost contact with the
remote sensor and the time is not
synchronized.
The unit cannot reach the remote
sensor.
icon
)
NOTE To force a manual search for RF clock
reception, press and hold TEMP / HYGRO SEARCH
on the main unit for 2 seconds.

TURN RADIO RECEPTION ON / OFF

When you are in the CLOCK & ALARM Display you
can turn the reception on or off.
To turn the radio reception ON:
Press and hold UP for 2 seconds.
To turn the radio reception OFF:
Press and hold DOWN for 2 seconds.
Alternatively, you can turn it ON / OFF in the CLOCK
Setting Mode (see relevant section).

HOW TO CHANGE SETTINGS

All settings and display options for this product are
accessible from the Main Menu.
9