Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
EN
Cleaning the Multi-Brush Bar
1. Turn the lock counterclockwise until it stops,
then remove the roller brush from the multi-
brush bar.
3. When it is dirty, rinse the roller brush with
clean water until it is clean.
18
2. Use scissor to cut off the hairs and fibers that
get stuck on the brush bar head. Wipe the dust
from the notch and transparent cover with a dry
cloth or paper towel. Thoroughly dry before use.
4. Stand the roller brush upright for at least 24
hours until it is fully dry.
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
Care & Maintenance
Cleaning the Mini Motorized Brush
1. Use a coin as illustrated to rotate the lock
counterclockwise until you hear a click.
3. Stand the mini roller brush upright in a well-
ventilated area for at least 24 hours until it is
fully dry.
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
2. After unlocking the mini roller brush, remove it
from the mini motorized brush, then rinse and clean
the brush head.
4. Once the mini roller brush is dry, reinstall it by
following the disassembly steps in reverse.
EN
19
Publicidad
Tabla de contenido
