Descargar Imprimir esta página

Bebecar IP SEAT Manual De Instrucciones página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
GB
4 - Introduce plastic piece of harness (J) into seat opening.
5 - Pull plastic piece of harness (J) through seat backrest.
6 - Clip plastic piece (J) in seat housing.
15-
FIT SEAT PADS:
1 - Fix shoulder pads (F) with elastic loop (H) to buckle (G).
2 - Fasten harness straps (B) to buckles (G).
3 - Then apply the shoulder belts (B) into the shoulder pads (F) as shown.
4 - Thread crotch strap (E) to seat cover opening, and then place crotch strap (E) inside the
protective pad (C) and fasten securely.
16 - FOLDING SEAT FOR EASY TRANSPORT AND STORAGE:
1 - First remove the bumper bar, then pull up the handle (C) situated behind the seat and
simultaneously move it to the closed position.
2 - Insert bumper bar ends into armrests.
17 - TO OPEN FOLDED SEAT:
1 - Remove the bumper bar, by pressing the buttons on the armrest.
2 - Press down on seat backrest pull up the handle (C) and simultaneously open seat.
WARNING
- A CHILD´S SAFETY IS YOUR RESPONSIBILITY
WARNING: This vehicle is intended for children from 0 months of age and up to maximum weight 22 kg or 4
years whichever comes first.
WARNING: Always use the crotch strap in combination with the waist belt.
WARNING It may be dangerous to leave your child unattended.
WARNING: Always use the restraint system.
New born babies are recommended to lie on the most reclined position.
The child should be clear of moving parts while making adjustments.
This vehicle requires regular maintenance by the user.
Never carry more children in the seat than it was design for.
Always apply brakes when loading or unloading child.
Read and keep the instructions supplied.
It may be unsafe to use accessories, e.g. child seats, bag hooks, rain cover etc. other than those approved by
BÉBÉCAR. It may be unsafe to use replacement parts, other than those supplied or approved by BÉBÉCAR.
Never allow a child to attempt to operate this vehicle. Remember, it is not a toy.
IMPORTANT: The hood must be in place at all times.
WARNING: Do not add a mattress thicker than 20 mm.
It is not advisable to have sources of heat (open electric or gas fires etc) near this product.
WARNING: Ensure that all locking devices are engaged before use.
Please remember that this vehicle is not waterproof. You must use a BÉBÉCAR PVC raincover, and that
raincover must be raised or removed when inside to give adequate ventilation. After use in wet weather, ensure
both the vehicle and PVC raincover are thoroughly dried and aired before storage or further use. Dry metal and
plastic parts with a soft cloth.
Note: For washing instructions see separate list.
GUARANTEE
All BÉBÉCAR products have a period of guaranteed subject to the local law of the country in which it is being
sold, from the date of purchase, against mechanical defects which will be repaired, or parts replaced free of
charge within this period. This is conditional upon the product having been used for the purpose for which it was
designed and no liability is accepted for defects arising out of fair wear and tear, undue force, neglect or accident.
In furtherance of their policy of continuous product development BÉBÉCAR reserve the right to make
specification and design changes.
EN 1888-2:2018

Publicidad

loading

Este manual también es adecuado para:

Ipb seat