Help In Case Of Malfunction; Risk Of Injury - AL-KO LSV 6 Manual De Instrucciones

GB

13 HELP IN CASE OF MALFUNCTION

In the event of malfunctions, switch off the log splitter immediately and remove the mains plug!
CAUTION!

Risk of injury

Sharp-edged and moving appliance parts can lead to injury.
■
Always wear protective gloves during maintenance, care
and cleaning work.
Malfunction
Motor does not start.
Green ON button does not latch
when pressed in
Splitting wedge does not move
up/down, but motor is running.
Splitting wedge has no force.
Unusual noises and vibrations
48
Cause
Motor protection switch has
tripped.
Mains plug or plug socket defec-
tive
Defective mains cable
Defective motor
No PE conductor or a phase not
connected.
Defective switch
Insufficient hydraulic oil
Defective hydraulic pump
Valve not open caused by loose
connection.
Operating lever or connecting
parts bent
For LSV 8: Wrong direction of
rotation of the motor caused by
incorrect phase connection of
the mains voltage
Insufficient hydraulic oil
Bent actuating lever
Insufficient hydraulic oil
Help in case of malfunction
Remedy
Wait until the motor has cooled
down.
Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Top up hydraulic oil.
Have replaced by a specialist
company or AL-KO service centre.
Tighten loose parts.
Have bent parts repaired.
Reverse the phases of the
mains voltage at the plug socket
of the log splitter.
Have inspected and corrected, if
necessary, by a qualified electri-
cian.
Top up hydraulic oil.
Have replaced by a specialist
company or AL-KO service centre.
Top up hydraulic oil.
LSV 6, LSV 7, LSV 8