1 E X P E R T U S E - CRESTO RESQ RED PRO III Manual De Instrucciones

Inspection and logged issues
Date
1 1 E X P E R T U S E
This section is not part of the EU type certification tests and is tested verified by the manufacturer
to ensure correct and safe use.
1 1 . 1 . A D D I T I O N A L F R I C T I O N - B O D Y M O U N T E D D E S C E N T
See figure 10.
Note! This operation requires an additional carabiner.
1. Connect the additional carabiner around the rescue rope just above the device.
2. Pull the trailing rope thru the friction loop and insert it into the carabiner. Make sure that the trailing
rope is managed so no entanglement occurs.
3. Start the descent by easing the grip around the trailing rope. Make sure that the trailing rope is not lost
during descent.
2 8 0 K G D E S C E N T W I T H R E D P R O I I I
1 1 . 2 .
Note! Descending with exceeded load over 200kg requires additional friction and is limited to ONE
descent of maximum 160m.
2 8 0 K G D E S C E N T W I T H T O P M O U N T E D R E D P R O I I I
1 1 . 3 .
See figure 11.
1. Attach the device to the anchor point directly or with the anchor sling EN795 cl B around a
sufficient structure.
8 © RESQ RED Pro III
a e and Signature
N m
of the competent person
Next due date for
periodic examination
Figure 10