Fossil OS10 Manual Del Usuario página 4

Adjusting The Chronograph
1 . Pull crown to position 3 .
2 . Press A to reset the second hand to "0 ."
3 . Press B to reset the chronograph minute and hour hands .
4 . Reset the watch to the current time and return crown to position 1 .
CHRONOGRAPH STOPWATCH OS20 / FS00
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
SECOND HAND
Time Setting
1 . Pull crown out to position 3 . Chronograph second hand will return to "0 ."
Do not return the crown to position 1 while the hands are returning to "0," or
else the position the hands are at when this is done will be recognized as
the new "0" position .
2 . Turn crown to set the desired time .
3 . Return the crown to position 1 .
A
24-HOUR HAND
1 2 3
B
6
Date Setting
1 . Pull crown out to position 2 .
2 . Turn crown counter-clockwise until the correct date is shown in the
date window .
3 . Return crown to position 1 .
Chronograph Zero Reset
This procedure should be performed when the chronograph second hand does
not return to the "0" position after the chronograph has been reset .
1 . Pull crown out to position 3 .
2 . Press A to set the chronograph second hand to the "0" position .
NOTE: The hands move quickly if the pushers are kept pressed .
3 . Once the hand has been zeroed, reset the time and return the crown to
position 1 .
Do not return the crown to position 1 while the hands are returning to "0 ."
Doing so will cause the position of the hands to be recognized as the new
"0" position .
Chronograph Operation
This chronograph is able to measure and display time in 1/1 second up to
maximum of 1 hour .
1 . Press A to start/stop the chronograph .
2 . Press B to reset the chronograph .
7