Usage Instructions; How To Turn On The Refrigerator; Filling The Refrigerator - Frigidaire FRD223YEFW Manual De Instrucciones

regulations. Do not remove the
grounding prong, do not use a two
pronged adaptor, and never make a
connection to the schematic. Use the
cord supplied with the equipment (do
not change it). If the cord is damaged, it
must be immediately replaced by
specialized personnel.
9
Attention
For your safety, installation must be
grounded. If it is not grounded, it
must be adapted for this by
specialized personnel.

Usage instructions

How to turn on the refrigerator

01. Clean the parts of the refrigerator
with lukewarm water containing a
littleneutral detergent and with clear
water, and wipe them dry.
02.Turn the thermostat knob to the "3"
position, turn on electricity. The
compressor and the light inside the
refrigerator begin to work.
03.Close the door 30 minutes later, if the
temperature in the freezer
compartment decreased obviously, it
shows that the refrigerator system
works well. When the refrigerator
operates for a period of time, the
temperature controller will
automatically set the temperature
within limits it opens.
04. If the above steps are successful,
the trial operations finish. The
refrigerator works normally.

Filling the refrigerator

Follow these instructions the first time
you fill the refrigerator, or after you
defrost it.
01. Turn the refrigerator on and let it run
for four hours prior to putting food
inside.
02. If the food is fresh, put it in the
refrigerator little by little, in one hour
intervals.
03. After filling the refrigerator, adjust the
thermostat to the appropriate position,
following the instructions under item
"Temperature Adjustment".
Attention
Electric parts of the refrigerator can
only be wiped by dry cloth.
10