Seat/Back Frame Assembly Replacement - Steelcase Cura II Instrucciones De Montaje
Ocultar thumbs
Ver también para Cura II:
- Manual de instrucciones (6 páginas) ,
- Instrucciones de montaje (6 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
®
HEALTH
Seat/Back Frame Assembly
Replacement for Sled Base
or 4-Leg Base
1.
The back fabric and seat fabric must
be removed in order to replace the frame.
To remove the back fabric perform step
2 on page 4.
To remove the seat fabric perform step 1
on page 5.
2.
Turn the seat/back frame assembly
90 degrees counterclockwise (2a) and pull
the seat/back frame assembly forward to
remove (2b). Repeat for the other
seat/back frame assembly.
3.
To reassemble chair, reverse steps 2a
and 2b.
4.
To install the back fabric perform
steps 3 and 4 on page 4.
To install the seat fabric perform step 2
on page 6.
Go to 'Add the Tension into the Chair'.
2a
SEAT/BACK
FRAME
ASSEMBLY
MAIN FRAME
ASSEMBLY
2b
Sled Base
SEAT/BACK
FRAME
ASSEMBLY
2a
MAIN FRAME
ASSEMBLY
2b
Page 7 of 30
4-Leg Base
939549932 Rev C
Publicidad
