Add The Tension Into The Chair - Steelcase Cura II Instrucciones De Montaje

®
HEALTH

Add the Tension into the Chair

1.
Place the chair on its back as shown.
2.
Insert the bolt with a washer into the right hand side of
the chair frame (2a). Install the bolt at least 1/2 way in (2b).
1
3.
Place the chair onto the floor as shown.
4.
Insert the bolt with a washer into the right hand side of
the chair frame (4a). Install the bolt at least 1/2 way in (4b).
BOLT
WASHER
2a
3
2b
4a
WASHER
BOLT
4b
Page 8 of 30
939549932 Rev C