aqprox appLS17I2D Guia Del Usuario página 16

Enter SPP mode Enter BLE mode
C: Enter waiting for pairing status, blue light flashes.
D: Connect Bluetooth to your custom software and search for Barcode
Scanner SPP /BLE.
E: The pairing is successful, and the green light is always on.
Bluetooth name setting
A: Start the scanner, scan "bluetooth name setting".
B: Scanning the code "read Bluetooth name"
Read Bluetooth name
B : Select the required personalized barcode (please be cautious before
reading the following instructions, thank you)
How to set the Bluetooth name: first scan the Bluetooth name barcode,
then scan a barcode.
This barcode will be set to the name of the Bluetooth.
Note: a) The name can only be set up to 16 bytes. If the name barcode
exceeds 16 bytes, the scan code gun only takes the first 16 bytes as
the Bluetooth name.
b) Bluetooth full name includes: Bluetooth name + protocol type, only
supports modification of Bluetooth name. After modifying the Bluetooth
name, the names of all Bluetooth protocols have changed.
For example, if the Bluetooth name is set to: Scanner, the name of the
Bluetooth HID is: Scanner HID, the name of the SPP is: Scanner SPP,
and the name of the BLE is: Scanner BLE.
16