Safety Instructions; Safety Features; Range Of Application - Orwak 9020 Instrucciones De Manejo

Read this instruction before operating the
instructions are followed and that only original spare parts and recommended hydraulic oil and
The user of the machine is responsible for the safety checks ,the maintenance and ensuring that ay faults are corrected to
aviod accidents. The usar is responsible for ensuring that all National and Local Laws are complied
This symbol means WARNING or DANGER - PERSONAL SAFETY INSTRUCTION.
The
ORWAK 9020
ALLOWED IN THE WORKING AREA. Only trained operators are allowed to use the machine.
Materials easily to set on fi re or of an explosive nature, such as cans with residual low fl ash point
liquids, or anything which could cause damage or explosion must not be compacted in the
ORWAK 9020
The machine must not be used if the safety functions have been interfered with such
as the opening of the head covers or limit switches.
The gas spring at the rear of the machine must not be exposed to high temperatures
such as welding.
If the machine needs to be moved, the press plate must be lowered fully before moving.
The machine must not be used by under age persons.
Do not climb on the machine.
During cleaning, maintenance and service the main switch always must be turned to zero and locked in
this position with a padlock to prevent unauthorized or unintentional start of the machine.
The machine is equipped with the following safety features :
The Main switch can be secured with a pad lock to prevent unauthorised use or when servicing the machine.
The Emergency Stop Switch breaks the electrical circuit immediately it is used. When the switch is reset the
machine will not restart.The start button has to be pressed again. The press plate always returns upwards to a
safe position.
Mechanical and electrical limit switches prevent the machine being used with the covers open or when the press head is
moved between chambers.
The machine can not be operated with the doors open as mechanical protection prevents this.
There are protective cover over the bale ejection mechanism at the rear of the chambers.
The electrical circuits of the machine are protected by a circuit breaker which also serves to protect the motor.
Under voltage protection is provided to prevent the machine from starting after a power failure.
ORWAK 9020
The
such as paper, plastic and light wooden boxes.
Materials easily to set on fi re or of an explosive nature, such as cans with residual low fl ash
point liquids, or anything which could cause damage or explosion must not be compacted in
ORWAK 9020
the

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS
ORWAK 9020.
lubricants are used.
with when using the
is designed for ONE MAN OPERATION. ONLY THE OPERATOR IS
baler.

SAFETY FEATURES

RANGE OF APPLICATION

is an hydraulically driven baler used mainly to reduce the volume of bulky materials
baler.
9020
GB
baler. Our warranty requires that the usage and safety
.
4